Create Orgs for Your Integration

Recall from our use case that when you enter a case record in your first org, it automatically appears in the second org. To successfully complete this project, you need access to the username and password of both orgs. 

Create Two New Trailhead Playgrounds

For this project, you need to create two new Trailhead Playgrounds. Follow these steps to create your playgrounds.

1. Scroll to the bottom of this page. You’ll see the name of a hands-on org and a Launch button.
2. Click the hands-on org name, then click Create Playground.
   Note: It typically takes 3-4 minutes to create a new Trailhead Playground. Also, you can only have 10 hands-on orgs connected at a time, so you may need to disconnect a couple to create new ones for this project.
3. Repeat the previous steps to create a second Trailhead Playground.

Yes, we really mean brand-new Trailhead playgrounds! If you use existing orgs or playgrounds, you can run into problems completing the steps in this project.

Get Your Trailhead Playgrounds’ Username and Password

The integration between Trailhead and the Playground org makes the default password inaccessible. You need a password to access the org from outside of Trailhead, such as MuleSoft Anypoint Platform.

To reset the Trailhead Playground password, follow these steps.

1. Scroll to the bottom of this page, select your first Trailhead Playground, and click Launch.
2. Click to launch the App Launcher, then search for and click Playground Starter.
3. Click the Get Your Login Credentials tab. Here you can see your Trailhead Playground username.
4. Click Reset My Password, then click Ok. This sends an email to the address associated with your username.
5. Click the link in the email. Enter a new password, confirm it, and click Change Password.
6. Follow the previous steps to get the username and reset the password for your second Trailhead Playground.

Make a note of the usernames and passwords because you’ll use them in the next step of this project. 

Set Login IP Ranges

For your integration to work as expected, you’ll need to set the login IP range for each of your orgs. If the login range isn’t set from 0.0.0.0 to 255.255.255.255, Salesforce will require you to use a security token. You can certainly set up your app to work with security tokens. However, this method is quicker.

In your Trailhead Playground, you control login access at the user level by specifying a range of allowed IP addresses on a user’s profile. When you define IP address restrictions for a profile, a login from any other IP address is denied.

Follow these steps to set the Login IP Ranges for your Trailhead Playgrounds.

1. Scroll to the bottom of this page, select your first Trailhead Playground, and click Launch.
2. Click  in the top right of your playground, and select Setup.
3. Enter Profiles in the Quick Find box, and select Profiles.
4. Navigate to the System Administrator profile, and click its name.
5. On the profile overview page, click Login IP Ranges.
6. Click New, and enter the following allowed IP addresses for the profile.
   • Start IP Address: 0.0.0.0
   • End IP Address: 255.255.255.255
7. Click Save.
8. Follow the previous steps to set the Login IP Range for your second Trailhead Playground.

Ready to check your work? In the Challenge section, select the first Trailhead Playground you created, and click Launch. Then click Verify Step to check your setup.

Resources

• Trailhead: Trailhead Playground Management
• Salesforce Help: Restrict Login IP Ranges in the Enhanced Profile User Interface